Dip Coater

Featured reactor Micro reactor Automatic reaction kettle Parallel reactor Hydrothermal reactor Glass reactor Parallel Synthesizer Dip Coater

Dip Coater

The immersion dip coating machine is a high precision instrument suitable for sol gel method (Sol--Gel method, SG method) to prepare thin films by immersion dip. The core components adopt imported accessories to accurately control the lifting speed, and the coating is repeated for many times without position deviation. The lifting speed, lifting height, immersion time, cycle coating times, immersion time, descent speed and residence time can be accurately controlled by program. It is suitable for sapphire substrate (111), sapphire resin (83o), ceramic sheet (100), etc. The immersion pull coating machine is mainly divided into two types: single station and multi station:

HTDC-300Dip Coater

This product is mainly used for preparing different kinds of film materials on the same substrate by sol-gel method. Place different solutions on the rotary table. By setting the coating procedure, the substrate enters the solution to pull the coating. After this coating, the rotary table automatically rotates the solution of the next layer of film directly below the substrate, the substrate drops into the solution to pull the coating, and the subsequent films are completed in turn. The running sequence of each station can be adjusted freely, and the shortest path can be selected intelligently. Each station has independent impregnation time, residence time and cycle times Product parameters of htdc-300m multi station immersion pull coater

Product features：

Imported linear guide rail and servo motor are adopted to accurately control the uniform lifting speed.

Imported linear guide rail and servo motor are adopted to accurately control the uniform lifting speed. The operation is stable without shaking, and the liquid level is free of vibration. Ensure the stability of the equipment and the uniformity of film formation.

The program control system independently developed by Huotong instrument is adopted. The lifting speed, lifting height, immersion time, coating times, coating time, falling speed and falling height can be adjusted through program control;

High end brand touch screen, clear interface and easy operation.

Special design fixture, more secure and firm clamping;

The whole machine is sprayed with plastic, and the appearance is exquisite and generous.

Product parameters：

HTDC-300Product parameters of dip coating machine：
Maximum stroke	0-300mm
Lifting speed range	1～9999 μm/s，Minimum resolution1 μm/s;
Position accuracy	0.01mm
Speed accuracy	±0.01%
Immersion time	1～3600 s
Coating times	1～1000
Coating interval	1～3600 s
Maximum sample size	10010010mm
Power Supply	AC 220V 50Hz

HTDC-300M Multi station immersion pull coating machine

Product parameters

Maximum stroke： 0-300mm;
Lifting speed range： 1～9999 μm/s，Minimum resolution1 μm/s;
Position accuracy： < 0.01mm;
Speed accuracy： ±0.01%;
Immersion time： 1～3600 s;
Coating times： 1～1000次;
Coating interval: 1～3600 s;
Rotary table speed: 1-10degrees/s;
Solution type: Up to 6;
Maximum sample size: 100*100*10mm，It depends on the number of stations used;
Power Supply： AC 220V 50Hz;

Pre-sales call ：010-60339180

After-sales call ：15210193225

Address：北京市北京经济技术开发区经海三路109号院

Email：xubinbin@htlab.cn

Products

Cuntom Center